The EVO Adjustable Control Arms are made from DOM tubing, feature complete on car adjustability without removing mounting bolts. This adjustability allows for pinion angle and caster adjustments to be made completely while installed on car to dial in your handling, caster alignment, and pinion angle with ease. No need to remove the control arms to make adjustments. Stage 1 includes EVO Front Adjustable Lower Control Arms to correct caster angle with EVO onVehicle Adjusters / Stage 2 includes in addition Rear Adjustable Upper Control Arms to adjust pinion angle / Stage 3 includes all 8 Adjustable Control arms for full suspension tuning. Currie Johnny Joints are used on both ends of each arm, rebuildable, greaseable, and isolated construction for decreased transmission of road vibrations.
The EVO Draglink Flip Kit raises trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. Roll center is greatly improved giving better handling/ steering response of the vehicle on and off road. The EVO Drag Link Flip Kit features an improved steering stabilizer mounting location to get it up and out of harm’s way above the tie rod.
This package is the ultimate in budget conscious extreme on and off road performance.
2Door JK: Front and rear aftermarket driveshaft required.
4Door JKU: Front aftermarket driveshaft required, rear recommended. (not included)
Recommended wheel backspacing 3.5” or less (smaller backspacing #)
No exhaust modifications required